All Dry Herb Vaporizers

DynaVap UniDyn — IriDyn IriDyn is here: a unique, iridescent take on DynaVap’s newest UniDyn vaporizer, capped with a limited-run Special Edition Captive Cap. Machined from lightweight titanium and finished with DuraDyn, the UniDyn introduces an industry-first titanium UniBody that integrates tip and stem for a seamless, ultra-clean experience. Available in very limited quantities. Who is the UniDyn for? Designed for flavour chasers who want efficient, hassle-free thermal extraction without electronics. Whether you prefer microdoses or fuller bowls, UniDyn’s XL length and adjustable controls deliver a smooth, personalised session. Key Benefits Superior vapour quality: Convection-forward cap behaviour for crisp flavour and dense pulls. XL comfort & cooling: Longer form factor helps tame heat and improves hand feel. Portability: Compact, lightweight titanium build; fits XL stashes for easy carry. Durability: Medical-grade titanium with IriDyn DuraDyn finish for long-lasting looks. Simplicity: Fewer parts, UniBody construction, and maintenance-friendly design. Microdose ready: Adjust-a-Bowl lets you tailor chamber size to your load. Dialled-in control: Seven airflow settings via the adjustable condenser. UniDyn Feature Highlights UniBody titanium: One-piece stem + tip for a seamless, ultra-rigid assembly. T-Break™ heat break: Reduces heat transfer between chamber and stem for cooler draws. Easy airport: Intuitive, easy-to-locate airport for on-the-fly airflow tweaks. 10 mm taper mouthpiece: Direct water-piece adaptability when you want cooler sessions. Serrated tip: Handy edge for breaking up material on the go. Adjust-a-Bowl: Rapid chamber size reduction for efficient microloads. Minimal O-rings: Only two total for simpler upkeep. Bowl size: ~0.1 g (adjustable). How to Use the UniDyn Remove the Cap and load ground herb into the chamber. Re-cap, then heat the Cap (not the stem) with a torch or induction heater until it clicks. Inhale from the mouthpiece. A second click signals cooldown. Reheat for more extraction, or save your AVB for later uses. Tip: Use the airport and the 7-position condenser to fine-tune draw resistance and vapour density. Parts & Build Special Edition Captive Cap Titanium UniBody Tip & Stem: UniDyn — IriDyn Stainless Steel CCD (screen) Titanium Condenser Assembly with Mouthpiece: UniDyn High-temp O-rings (2) In the Box DynaVap Tin Case Pink Slip Accessory Compatibility The Wand with Adaptor DynaStash XL SlimStash XL SlingStash (with storage cup removed) Specs Length XL Material Medical-grade titanium (UniBody) Finish Iridescent IriDyn (DuraDyn) Bowl size ~0.1 g (Adjust-a-Bowl compatible) Airflow settings 7 via adjustable condenser Mouthpiece 10 mm taper Heat source Butane torch or induction heater (sold separately) Maintenance Only 2 O-rings; simplified upkeep

Read more less

DynaVap HyperDyn TygerDyn: Titanium Big Bowl Dry Herb Vaporizer DynaVap HyperDyn – TygerDyn Introducing the TygerDyn HyperDyn, a bold new release with a striped DuraDyn finish that is as durable as it is striking. Built from medical-grade titanium and engineered for serious sessions, this is the first Big Bowl vaporizer from DynaVap — designed to deliver heavy hits, extended sessions, and adjustable control in the palm of your hand. Who is the HyperDyn for? The HyperDyn is made for connoisseurs who want a “session style” thermal extraction — bigger rips, longer bowls, and precision control without batteries. Key Benefits Massive rips & extended sessions: 0.25 g chamber capacity pushes extractions further before reloads. Durability you can feel: Fully machined titanium construction with scratch-resistant DuraDyn finish. Flavour focused: Clean thermal extraction brings terpene-rich vapour without combustion. Water piece ready: Built-in 10 mm and 14 mm tapers for easy bong integration. Battery-free design: No electronics, no charging. Heat with a torch or induction heater anywhere. Discreet & modular: Pocket-sized and compatible with previous DynaVap midsections, tips, and mouthpieces. HyperDyn Features Bigger tip chamber/bowl (~0.25 g) for session-length extractions Clean, durable look with DynaVap’s DuraDyn striped TygerDyn finish Hardened titanium build for lifetime performance Dual taper (10 mm / 14 mm) for water piece fitment Modular compatibility with legacy DynaVap parts (except Hyper Cap ↔ Hyper Tip is unique) Ergonomic stem with easy airport access Precision-machined Hyper Cap with consistent Captive Cap click technology Seven adjustable airflow settings via condenser depth control How to Use the HyperDyn Remove the Hyper Cap and load ground herb into the titanium Tip chamber. Re-attach the Cap, then heat evenly with a torch or induction heater until it clicks. Inhale through the mouthpiece. A second click signals cooldown. Reheat for more extraction, or save AVB (already vaped bud) for later uses. Parts & Build Hyper Cap – TygerDyn Titanium Hyper Tip – TygerDyn Titanium Stem – TygerDyn Titanium Condenser Assembly with Mouthpiece Titanium CCD (screen) High-temp O-rings (4 total) Also Includes DynaVap Hyper Dosing Capsule (~0.125 g capacity, fits Hyper Tip; also sold in 5-packs) DynaVap Tin Case Accessory Compatibility The Wand with Adaptor DynaStash XL SlimStash XL SlingStash (with storage cup removed) Specs Bowl size ~0.25 g (Hyper Tip chamber) Material Medical-grade titanium Finish DuraDyn TygerDyn striped pattern Heat source Butane torch or induction heater Tapers 10 mm & 14 mm Airflow settings 7 adjustable positions via condenser depth

Read more less

DynaVap M7 TwoToniuM Meet TwoToniuM — the first two-tone Fall colour from DynaVap. With a sharp, dark-to-light contrast and all the performance of the latest M 7, this eye-catching, pocket-friendly device is built for flavour, efficiency, and total portability — no batteries required. Available in limited supply. Why you’ll love the M7 TwoToniuM Battery-free freedom: Heat with a butane torch or induction heater and enjoy anywhere, anytime. Durable by design: Medical-grade stainless steel, made in the USA. Flavour first: Thermal extraction unlocks terpene-rich vapour and clean taste. Use less, get more: Stretch your herb — many users report using >50% less material with excellent results. Discreet & modular: Palm-sized, pocket-ready, and compatible with DynaVap accessories. Who is the M7 for? Anyone who wants an exceptional dry herb experience — from microdosing to complete extractions — without electronics. M7 feature highlights Bigger rips & heat retention: A higher-mass tip and chamber for stronger, more controlled extractions. Finless tip, cooler fingers: Up to 20% less heat transfer from tip to stem. Even extractions: Refined mass distribution reduces scorching and hot spots. More airflow: Redesigned captive cap fitment + increased convection vs previous M models. Simple airflow control: New airport with “Pivot”-style rocker for on-the-fly tuning. Microdose-ready: “Adjust-a-bowl” halves the chamber size in seconds. Streamlined grip: Textured stem pattern for secure handling and a fresh look. Captive Cap “click”: Audible temperature cue for consistent, user-controlled sessions. How to use the M7 TwoToniuM Remove the Cap and load ground dry herb into the Tip chamber. Re-cap, then heat the Cap (not the stem) with a torch or induction heater until it clicks (about 5–7 seconds). Inhale from the mouthpiece. When the Cap clicks again, it has cooled. Re-heat for further extraction, or save your AVB for later uses. Tip: Cover or feather the airport to fine-tune vapour density and temperature draw-by-draw. Parts & build DynaVap Captive Cap Stainless Steel Tip: M 7 — TwoToniuM Stainless Steel Stem: M 7 — TwoToniuM Stainless Steel CCD (screen) High-temp O-rings (2) Stainless Steel Condenser + O-rings (2) What’s in the box DynaVap Tin Case DynaTorch (single flame / empty) Pink Slip Specs Bowl size ~0.1 g (adjust-a-bowl compatible) Material Medical-grade stainless steel Heat source Butane torch or induction heater (sold separately) Design Two-tone “TwoToniuM” finish; finless M7 tip; textured stem FAQ Is the M7 TwoToniuM good for microdosing? Yes. Use the adjust-a-bowl to reduce the chamber by half for efficient micro-loads. What’s the best heat source? It works with virtually any flame, but a quality butane torch or an induction heater delivers the best flavour and consistency. How do I control vapour? Feather the airport and experiment with heat placement/rotation on the Cap. The Captive Cap’s click gives a repeatable temperature cue.

Read more less

Ruby Twist Injector Vaporizer Kit – Titanium Ball Vape with Ruby Core The Ruby Twist Injector is a next-generation ball vape thermal injector designed for massive heat retention, smooth airflow, and incredibly efficient extractions. Built from durable titanium and filled with ~230 gem-cut ruby pearls, this desktop powerhouse delivers stable heat, huge clouds, and the kind of performance usually reserved for much more expensive injectors. Why the Ruby Twist Stands Out Twisting Airflow Design: A vortex-style intake path spirals the output air, maximizing contact for consistent vaporization and richer flavour. 230 Ruby Thermal Mass: Gem-cut ruby holds and radiates heat evenly, preventing hot spots and allowing powerful, repeatable hits back-to-back. Titanium Housing: Lightweight yet strong, the titanium injector ensures quick responsiveness and durability. Fast Heat-Up: Reaches operating temp in mere minutes thanks to the 20 mm coil and precision PID controller. Low Maintenance: Easy to clean, simple design—no moving parts, no hassle. Complete Kit – Everything You Need Ruby Twist Injector Core (titanium housing with ~230 ruby media) Crossing Tech PID Controller (digital screen, auto shutoff, °F/°C toggle) 20 mm Heater Coil with handle Coil Heat Guard for safe operation Adjustable Microdose Diffuser Chamber (pass-through design, compatible with small or large loads) 14 mm → 19 mm Glass Adapter Coil Stand to safely rest the hot injector Herb Scoop & Wood Brush for easy prep and cleaning Note: Water pieces/bubblers are sold separately, but the kit works with 14mm and 18mm glass. Technical Specifications PID Controller Power: up to 150 W Voltage: 120 V standard (auto-switches for 220 V when paired with 220 V coil) Temperature Range: 220°F – 990°F Connector: 5-pin XLR Controller Size: 72 × 36 × 108 mm (2.83 × 1.42 × 4.25 in) Weight: ~0.8 kg Heat-Up Time: ~45 seconds How It Works Plug the titanium Ruby Twist injector into the PID and place it in the heat stand. Set your target temperature on the PID (typical range 270–330°C / 518–626°F for efficient vaporization). Load your herb into the microdose diffuser or compatible bowl. Place the injector on top of the bowl and draw steadily. The twisting airflow ensures even heating without stirring. Return the injector to the coil stand between hits. Safety & Care Do not preheat the injector while seated in glass; thermal expansion can damage the bowl. Always use the included stand when the injector is hot. Keep loose sleeves, hair etc. clear of the coil and injector. Clean glass with ISO, rinse and dry thoroughly before use. Who It’s For Ball vape enthusiasts seeking premium performance at an unbeatable value. Users who want consistent results with low-temp efficiency or high-temp extraction power. Everyday desktop users looking for simple, reliable, and hard-hitting design. Why Choose the Ruby Twist? With its titanium housing, massive ruby thermal core, and twisting airflow, the Ruby Twist Injector is one of the most efficient and powerful ball vapes available today. It outperforms many pricier competitors by delivering smoother, denser vapour at lower temps—all while staying simple to set up and easy to maintain. If you want serious desktop performance in a complete kit, this is it.

Read more less

DynaVap B2 – Complete Entry Kit (Silicone Stem, 0.075 g Bowl, DynaTorch) The DynaVap B2 is a refined evolution of the original B: an ultra-accessible, durable dry herb vaporizer that keeps things simple while adding real quality-of-life upgrades. You get a 0.075 g bowl that’s 50% larger than the original, an unbreakable silicone stem with an O-ring-free tip interface, a full stainless-steel airpath, 10 mm water-piece compatibility, and the brand-new DynaTorch lighter in the box — all in one ready-to-go kit. Ships fast from the USA with reliable customer service from Sneaky Pete Store. Key Features 0.075 g bowl (~50% larger than the original B’s 0.05 g) for longer, more satisfying sessions. Silicone stem: flexible, pocket-safe, O-ring-free tip interface; improved anti-roll geometry. Stainless-steel airpath via the condenser for clean, durable performance. 10 mm water-piece fit — drop into compatible glass for cooler draws. DynaTorch included — DynaVap’s custom butane torch with cap-inspired styling. Protective tin case — cap-shaped, sized to store the B2 and DynaTorch together. Induction-heater compatible — stainless tip & cap play nicely with IH units. Tip-swappable — use other DynaVap tips; O-rings can remain installed. What’s Included DynaVap B2 device (silicone stem + stainless-steel tip & condenser) DynaTorch butane lighter Protective tin case (cap-inspired design) Specifications Bowl size 0.075 g (fixed; no adjustable CCD positions) Stem Silicone; O-ring-free tip interface; anti-roll shaping Airpath Stainless-steel tip → stainless-steel condenser → mouth Water-piece compatibility 10 mm Heating Butane torch (included) or induction heater Case Cap-inspired protective tin; fits device + torch Who the DynaVap B2 Is For Great Fit If You Want… An entry-friendly, budget-conscious DynaVap starter kit An unbreakable, pocketable stem with low maintenance Water-piece options without extra adapters (10 mm) Induction-heater flexibility Consider Alternatives If You Want… Adjustable bowl depth (CCD position changes) Premium/exotic materials throughout Advanced airflow controls and fine-tuning Quick Start & Tips Grind & load lightly to the rim (0.075 g). Don’t overpack. Heat evenly while rotating the cap; avoid hovering on one spot. Listen for the click — start drawing on the first click; reheat after the cool-down click. Try water: seat the B2 in a 10 mm glass piece for cooler, smoother vapour. IH users: stainless tip & cap make induction heating consistent and convenient. DynaVap B vs DynaVap B2 (Quick Comparison) Feature B B2 Bowl size ~0.05 g 0.075 g (~+50%) Tip Very basic Redesigned geometry Stem Silicone, O-ring-free interface Silicone with anti-roll shaping; O-ring-free interface Airpath Stainless via condenser Stainless via condenser Water-piece fit 10 mm 10 mm Included torch Not included DynaTorch included Case Varies Protective tin (cap-inspired) Frequently Asked Questions What’s new on the B2 versus the original B? The B2 adds a 0.075 g bowl (~50% larger), a redesigned tip, an O-ring-free tip interface on the silicone stem with anti-roll shaping, keeps the stainless-steel airpath, and now includes the DynaTorch and a protective tin case. Does the B2 work with induction heaters? Yes. The stainless-steel tip and cap make the B2 compatible with common DynaVap-style induction heaters. Can I use other DynaVap tips on the B2 stem? Yes. The B2 stem accepts other DynaVap tips. If your tip has O-rings installed, you can typically leave them on. Will the B2 fit a water piece? Yes — the B2 interfaces with 10mm connections for quick, compact water cooling. Is the CCD adjustable on the B2? No. The B2 uses a fixed 0.075 g bowl for straightforward loading and repeatable results. Why Buy from SneakyPeteStore.com U.S.-based retailer — fast, tracked shipping from within the United States Expert support — guidance from a team that’s been reviewing and testing vaporizers for 11+ years Accessories included — we stock the stems, glass, and upgrades that complete your setup Tip: Pair your B2 with a 10mm glass piece, extra CCDs, and an induction heater for the most versatile experience. Read our full DynaVap B2 review here.

Read more less

Vapvana All-Star Wired Kit – Affordable Powerhouse Ball Vape The All-Star Wired Kit by Vapvana is the newest addition to their lineup of high-performance desktop vaporizers. Built with a stainless steel housing and a modular design, the All-Star delivers massive, reliable vapour at a fraction of the price of premium titanium units. If you’ve wanted to experience the upper echelon of ball vape performance without breaking the bank, this kit is your ticket. Ball Vape Performance Without the Premium Price The All-Star borrows from Vapvana’s proven design philosophy: powerful heat, efficient airflow, and dense, flavour-rich vapour. While the Screwball remains Vapvana’s flagship titanium heavy-hitter, the All-Star provides an affordable entry point into the same league of performance. With its stainless steel build, diffuser-style heating, and 300 2.5mm ruby balls, the All-Star is engineered to satisfy both daily users and connoisseurs alike. Customizable Bowl for Microdosing or Full Sessions One of the standout features of the All-Star is its two-in-one modular bowl. Use it in half-size mode for a 0.1g load - perfect for microdosing or solo use - or switch to full-size mode for a 0.2g load, ideal for sharing or when you want huge, lung-expanding clouds. This flexibility makes the All-Star a versatile choice, bridging the gap between efficiency and raw power. Back-to-Back Power with Corded Convenience Unlike portable units that rely on battery life, the All-Star is a corded desktop vaporizer. Once it heats up, it’s ready to deliver back-to-back sessions without losing performance. No downtime, no waiting—just consistent, dense vapour whenever you want it. For daily drivers who want reliability and endurance, a wired setup is the gold standard. Engineered for Flavour and Reliability The All-Star’s stainless steel heater and ruby ball-filled diffuser maximize thermal retention and airflow, ensuring every hit is smooth, flavourful, and potent. Combined with the modular bowl, glass joint adapters, and a digital PID temperature controller, the All-Star Wired Kit offers a complete package designed to perform for years. What’s in the Box All-Star Wired Heater (stainless steel, pre-assembled with rubies) All-Star Modular Bowl with removable wooden handle 18mm and 14mm glass adapters for bowl Digital Temperature Controller (PID) Power cable (North American) Heater stand Scoop & Tamper Tool (SQP) Wooden cleaning brush Spare screens & O-rings Why Choose the All-Star Wired Kit? If you’re looking for a powerful, affordable ball vape that can stand toe-to-toe with premium models, the All-Star Wired Kit is a clear choice. It combines Vapvana’s reputation for dependable performance with a price point that makes top-tier vapour accessible to more enthusiasts. For anyone wanting to experience the next level of desktop vaporization, the All-Star delivers inning after inning.

Read more less

Vapvana All-Star Cordless Kit – Wireless Ball Vape Power and Freedom The All-Star Cordless Kit by Vapvana takes the same affordable power and performance of the All-Star lineup and removes the tether. With a cordless heater head and an organized wooden dugout dock, this system delivers massive, flavour-rich vapour without being tied to a wall. Designed for both flower and concentrates, the All-Star Cordless is a complete dual-use solution built for enthusiasts who want freedom, performance, and convenience in one package. Wireless Performance, Desktop Reliability Vapvana is known for its powerful ball vapes, and the All-Star Cordless continues that tradition with a stainless steel heater packed with 300 ruby balls (2.5mm). While the premium Ace system is made from titanium and uses gem-cut rubies with a larger bowl capacity, the All-Star Cordless provides a more accessible entry point to the same high-level performance. You still get dense vapour, strong flavour, and dependable heat - now with true wireless convenience. Dual-Use Design: Flower or Concentrates What sets the All-Star Cordless apart from the wired version is its dual-use capability. Out of the box, it’s ready for flower with the All-Star Modular Bowl, which can be used in half-size mode (0.1g microdose) or full-size mode (0.2g heavy hits). But the kit also includes a 25mm quartz auto-spinner banger with pearls and marble top, making it a fully capable concentrate system as well. With the included glass reducer, you can fit the banger onto 10mm or 14mm rigs. The Dugout Dock: Organized and Ready The wooden dugout dock is the control centre of the All-Star Cordless Kit. It holds the digital PID controller, heating coil, heat shield, heater stand, and all included accessories in one compact station. Built-in slots for 10mm, 14mm, and 18mm joints mean you can keep everything neatly in place. This isn’t just a heater - it’s a complete desktop setup designed for convenience and everyday use. Freedom vs. Endurance Going cordless means you gain tether-free freedom to move and use your setup without being locked to a wall plug. The trade-off is that, unlike the wired version, you won’t get endless back-to-back sessions without breaks. For many users, the ability to untether more than makes up for it, especially with the added dual-use flexibility and all-in-one dock design. What’s in the Box All-Star Cordless Heater (stainless steel, pre-assembled with rubies) All-Star Modular Bowl with removable wooden handle Heating Coil Assembly (25mm “Hot Hole”) Wooden Dugout Dock with built-in accessory slots Quartz Banger (25mm Auto Spinner) with pearls and marble top Glass Reducer (14mm to 10mm) Digital Temperature Controller (PID) Power cable (North American) Heater Stand Post for the dock Scoop & Tamper Tool (SQP) Wooden Cleaning Brush Spare screens, o-rings, and screws Why Choose the All-Star Cordless Kit? If you want premium ball vape performance in a complete, organized package at an affordable price, the All-Star Cordless Kit is your answer. With wireless freedom, dual-use compatibility, and Vapvana’s reputation for reliable performance, this system is built to impress. Whether you’re chasing massive clouds, rich flavour, or the convenience of a docked all-in-one setup, the All-Star Cordless delivers inning after inning.

Read more less

The Natural Kit – All-Glass Ball Vape System by Vapvana 🔥 The Pinnacle of Purity – No Metal, No Compromise If you’re the kind of person who wants the best, then this is the kit for you. The Natural Kit from Vapvana isn’t just another Ball Vape—it’s a statement. Featuring a completely metal-free vapor path made entirely of quartz and sapphire, this is the first of its kind. From the injector housing to the glass bowl, The Natural delivers ultra-clean flavour in an all-in-one, no-missing-parts setup designed for those who truly know what they’re looking for. 💨 Why Choose The Natural Kit? 100% Quartz + Sapphire Heating Engine – Zero metal. All glass. Just pure thermal extraction. Complete Connoisseur-Grade Kit – Includes every single part you need (except water piece & flower). Precision PID Controller – Dial in your exact temp with confidence. Concentrate-Ready – Includes a full quartz banger setup with spinner action. Wooden Dugout Dock – Keeps your station clean, organized, and ready for launch. ⚙️ Kit Contents The Natural Heater – 18mm Quartz Injector housing with ~205 sapphire pearls, threaded lid, and quartz handle All-Glass Backstop Bowl – Built-in 10mm adapter and dry catch PID Temperature Controller – For total heat control Power Cable – 110v for North American systems Dugout Dock – Solid wooden base for controller, coil, and tools 20mm Hot Hole Coil – Delivers powerful, stable heat Heater Stand Post (with Glass Insert) – Keeps the quartz heater safely parked Quartz Banger Set – 20mm auto spinner with 8mm pearl and marble cap Tools Included – Scoop + brush = ready for game time BONUS: Early orders include a FREE Basic Glass Injector Bowl 🎯 Who Is This Kit For? Connoisseurs who crave the cleanest flavour possible Ball Vape enthusiasts who want an all-in-one setup Users ready to ditch metal and embrace full quartz & sapphire performance Anyone who appreciates great design and organized function 🧠 FAQ Q: Does this kit include everything I need to get started? A: Yes—everything except your water pipe and herb. You’re fully loaded with tools, heat system, bowls, and concentrate gear. Q: Is the heater pathway 100% metal-free? A: Yes. The heater is built entirely from quartz and sapphire—no metal at all in the airpath or engine design. Q: Can I use this with concentrates? A: Absolutely. The kit includes a quartz banger set specifically for concentrate use. Q: How does the flavour compare to other Ball Vapes? A: With no metal in the mix and full quartz & sapphire internals, The Natural delivers a noticeably cleaner, purer flavour than standard setups. 🏆 Step Up to The Natural The Natural Kit isn’t for everyone—it’s for those who know exactly what they want. No plastic, no metal, no weak links—just full flavour and flawless function. If you’ve been waiting for the ultimate glass-on-glass Ball Vape experience, this is it. Read our full review of the VapVana Natural here.

Read more less

DynaVap G3 – Battery-Free Glass Vaporizer for Dry Herb The Purest Way to Vape, Now Under $35 Experience Thermal Freedom No batteries. No buttons. No nonsense. The DynaVap G3 brings back the joy of pure, direct vaporization—with just a torch and a flick of the wrist. Built around the power of thermal extraction, this all-glass portable vaporizer delivers rich flavour and smooth hits in seconds. Whether you're a microdoser, minimalist, or just tired of charging, the G3 keeps it simple without cutting corners. Why Choose the G3? Battery-Free by Design – Heat it with a torch - no cables, no chargers, no waiting. Glass-on-Glass Purity – A unibody stem and tip combo built from quality glass for clean flavour and easy maintenance. Captive Cap Technology – Audible “click” lets you know exactly when it’s ready—no guesswork, no overheating. Tri-Lobe Stem – Anti-roll design keeps your G3 from slipping off the table and onto the floor. Pocket-Sized Efficiency – The G3 tin case fits anywhere. Just toss it in your pocket, heat it up, and go. Simplify Your Session Load the chamber with just a pinch - around 0.05g is all it takes. Then cap it, heat it, and inhale. The G3’s click-to-vape system means you don’t need to guess when it’s ready. It’s fast, efficient, and designed to stretch your herb further than you thought possible. Want a stronger hit? Just let it soak up a few more seconds of heat, then ride the clouds. What’s in the Box? 1 × G3 Glass UniBody (tip + stem) 1 × Stainless Steel Captive Cap 1 × Clipper Torch Lighter (USA only) 1 × Slim Metal Storage Tin Recommended Tips Heat the cap evenly near the tip until you hear the first “click.” Inhale slowly for best vapour density and flavour. Listen for the second “click” to know when it’s cooling down. For stronger hits, heat for an extra second or two after the first click. Lightweight. Portable. Powerful. The DynaVap G3 isn’t just a budget-friendly entry into the world of dry herb vaporization - it’s a fully capable, highly efficient tool in a glass package. Whether you’re new to vaping or just want something simple and effective, this is one of the best value buys under $40. Perfect For: Anyone new to vaporizing looking for an easy entry point Fans of clean flavour and full manual control Microdosers and budget-conscious users People who hate charging and just want to heat and go Ready to Cut the Cord? Step away from batteries and into total control. The DynaVap G3 is your new go-to for flavourful, on-demand thermal extraction—whenever and wherever you want it. No batteries. No limits. Just glass, flame, and performance. Read our full DynaVap G3 review here.

Read more less

Ceramo XL – The Pinnacle of Battery-Free Convection Welcome to a new standard in dry herb vaporization. The Ceramo XL is a precision-engineered convection device built for purists who value clean flavour, efficient extraction, and rock-solid durability. It’s designed to outperform traditional vaporizers — all without batteries or electronics. One-Piece Zirconia Construction The Ceramo XL is machined from a solid block of black zirconia — a tough, heat-resistant ceramic known for its stability and neutral flavour. Its friction-fit screen and no-o-ring design reduces maintenance and keeps performance consistent session after session. Designed for Performance, Built to Last Ceramic Airpath – Smooth airflow with minimal heat soak or flavour distortion Ultra-High-Flow (UHF) Stem – Built for strong, easy draws and fast clearing Heater Plate Matrix – Optimized for deep, even convection extraction 0.2g Chamber Capacity – Wide and shallow for easy loading and quick clearing 14mm Male Taper – Compatible with your favourite glass pieces Replaceable Metal Screen – Friction-fit for easy cleaning or swapping How to Use the Ceramo XL Loosely fill the chamber with a medium grind of dry herb. Place the XL Camo Cap onto the heater end of the device. Apply heat to the tip using a torch or the Inductor. Heat for 4–7 seconds (Inductor) or 7–15 seconds (torch). Inhale gently from the stem. Rotate and reheat for 2–3 cycles to fully extract your material. What’s Included 1 x Ceramo XL (Black Zirconia) 1 x XL Camo Cap 1 x Replaceable Metal Chamber Screen 1 x Bambox Storage Case 1 x Burner Torch Lighter 1 x Cap Adjustment Tool Inspired by the Convector XL The Ceramo XL expands on the proven design of the Convector XL, delivering even greater airflow, upgraded materials, and a simplified, o-ring-free structure. It retains the trusted heater matrix and 14mm taper while pushing flavour and form to the next level. Why Choose Ceramo XL? Ceramic Airpath – Smooth flavour and high heat resistance Low Maintenance – No o-rings or fragile seals Fast Extraction – Full sessions in 2–3 heat cycles Glass Ready – 14mm taper fits water pieces right out of the box If you’re ready for high-performance convection without batteries or complexity, the Ceramo XL is your next move.

Read more less

Healthy Rips FURY 3 – Compact Powerhouse Dry Herb Vaporizer Big Vapour, Small Package The FURY 3 by Healthy Rips delivers exceptional vapour quality in a discreet, pocket-sized design. With rapid heat-up, robust convection heating, and a pure glass airpath, this portable vaporizer punches well above its weight class. Key Features Rapid Heat-Up: Ready to use in approximately 25 seconds. Convection Heating: Combines hot air convection with a touch of radiant heat for even extraction without stirring. Pure Vapour Path: Features a food-grade titanium chamber and glass cooling stem for clean, flavourful vapour. Portable Design: Compact and lightweight, ideal for on-the-go sessions. Water Pipe Compatibility: Powerful enough to pair with your favourite water piece for smooth, dense clouds. What's in the Box 1x FURY 3 Device 1x Protective Travel Cover 1x Standard Mouthpiece for use with glass accessories 1x XL Glass Cooling Stem (80mm / 3 inches) 1x Dosing Capsule 1x USB-C Charging Cord 1x Extra O-Ring & Screen Set 1x Cleaning Tool 1x Cleaning Brush 1x Tweezers 1x User Manual Warranty Includes a One-Year Free Replacement Warranty Experience the FURY 3 Whether you're a seasoned enthusiast or new to vaporizing, the FURY 3 offers a seamless blend of portability, power, and pure flavour. Its advanced features and robust build make it a reliable companion for both solo sessions and group gatherings. Read our full Healthy Rips FURY 3 review here.

Read more less

Wireless One Hit Wonder (WOHW) – Premium Wireless Ball Vape Kit The Best Wireless Desktop Vaporizer for Dry Herb The Wireless One Hit Wonder (WOHW) by Crossing Tech is the ultimate wireless ball vape for dry herb. The WOHW delivers incredible flavour, huge vapour production, and ultra-smooth airflow—all without the mess of cords. It’s a compact, powerful solution for anyone who wants a high-end experience with none of the hassle. Why Choose the Wireless One Hit Wonder? Wireless Ball Vape Power – Enjoy desktop performance with cordless convenience. Dual-Use Housing – Use as either an injector or diffuser-style vape with the included Titanium Matrix Bowl. Ruby-Filled Titanium Head – Packed with 520 precision-cut rubies for consistent heat retention and dense vapour output. Hybrid Heating – Combine convection and conduction for intense, flavorful extractions. All-in-One Base – Includes a coil guard, tool storage, and built-in wire wrap system for a clean setup. Optimized for Versatility Switch effortlessly between injector and diffuser modes. The included Titanium Matrix Bowl works perfectly in both configurations, and the housing is also compatible with the many popular glass ball vape bowls for users who prefer a glass setup. Efficient, Thoughtful Design Compact, Low-Footprint Build – Perfect for home or group sessions. Heat Guard Protection – Shields the coil and provides extra safety during sessions. Custom Coil Base – Machined storage holes for bowls, tools, and a built-in wire tidy system. Recommended Usage Tips Set the PID controller to 535°F for a great starting point, and adjust temperature suited to your preference. Let the unit heat for 5 minutes to allow full heat soak. To maximize hybrid extraction, heat your bowl upside-down on the injector side before use. The WOHW works exceptionally well with dry herb and can also be effective with hash when used with a double screen or a bit of herb as a base. What's Included in the Full Kit 1x WOHW Stand with Grippy Feet Installed 1x 25mm Barrel Style Heater Coil 1x Classic PID Controller 1x WOHW Titanium Head with Ruby Gemstones Installed 1x Titanium Matrix Bowl with 14mm Male Glass Joint 1x 18mm Glass Joint for Matrix Bowl 1x Screen Pack for Matrix Bowl 2x Replacement O-rings for Matrix Bowl 1x SQP Herb Scoop & Tamper Tool 1x Cleaning Brush 1x Allen Key (for coil installation) 1x Instruction Sheet Warranty & Support 1-Year Manufacturer Warranty on PID Controller and Heater Coil Please note: while the housing is wireless, the PID controller must be plugged into a power source. Frequently Asked Questions (FAQ) Is this a true wireless vaporizer? The heater housing operates wirelessly while docked on the base, but the PID controller does require a wall plug to operate. Can I use concentrates with this setup? While this kit is optimized for dry herb, it can be adapted for concentrates with a 25mm quartz banger (sold separately). What temperature should I start at? We recommend starting at 535°F and adjusting based on your preference. Let the unit heat soak for about 5 minutes for best results. Is this setup beginner friendly? Yes! The WOHW is straightforward to use with a detailed instruction sheet included. It's great for beginners and power users alike. What’s the difference between injector and diffuser modes? Injector mode delivers pure convection hits, while diffuser mode offers a hybrid experience by heating the bowl as well as the air. You can switch modes based on your extraction preference. Ready to Upgrade Your Desktop Vape Game? Say goodbye to cords and compromises. The Wireless One Hit Wonder offers elite performance, hybrid flexibility, and modern convenience—all in one compact kit. This is the most powerful wireless dry herb vaporizer on the market today. Read our full WOHW review here.

Read more less

DynaVap UniDyn – The Ultimate Convection Vape Experience The DynaVap UniDyn is the next evolution in thermal extraction, designed for pure flavour, enhanced efficiency, and hassle-free maintenance. Crafted from lightweight titanium, the UniDyn is DynaVap’s first-ever integrated unibody design, combining the tip and stem into one seamless unit. This groundbreaking design reduces parts, simplifies upkeep, and improves durability—all while delivering a next-level convection experience with the BallR Cap. What Makes the UniDyn Special? Fully Integrated Titanium UniBody – The first DynaVap to feature a tip and stem in one, eliminating O-rings and reducing maintenance. BallR Cap Included – Comes preloaded with stainless steel balls that enhance convection heating, improving flavour and efficiency. Adjust-a-Bowl for Microdosing – Customize your session size by adjusting the CCD screen to hold as little as 0.05g of dry herb. 7-Setting Adjustable Airflow – Easily fine-tune your draw with precise control over vapour production and density. DuraDyn Finish for Enhanced Durability – A scratch-resistant, cross-hatch texture that improves grip and longevity. 10mm Water Pipe Compatibility – The built-in mouthpiece fits directly into 10mm glass adapters for water filtration. Why Choose the UniDyn? 1. Convection Power with the BallR Cap The included BallR Cap takes performance to the next level by retaining heat in the stainless steel balls, delivering a stronger, smoother, and more efficient convection experience. Unlike traditional DynaVap caps that rely on conduction, the BallR Cap focuses on convection—meaning better flavour, stronger effects, and more complete extractions. 2. Ultra-Lightweight Titanium Design The UniDyn’s medical-grade titanium construction keeps it incredibly light, yet highly durable. The unique DuraDyn finish makes it even more resistant to scratches and wear while adding a satisfying texture for better grip. 3. Simple, Efficient, and Built to Last Fewer parts mean less maintenance—no more O-rings on the tip. Microdose-friendly with the Adjust-a-Bowl feature. The HypoTherm heat break reduces heat transfer up the stem for a more comfortable session. How to Use the UniDyn Remove the BallR Cap and load your dry herb into the titanium bowl. Reattach the Cap and heat it with a torch or induction heater until it clicks. Inhale and enjoy—the convection-focused design delivers unmatched flavour and vapour quality. The Cap clicks again when it cools, letting you know it’s ready for another heat cycle. FAQs About the UniDyn Q: How is the UniDyn different from other DynaVap models?A: The one-piece UniBody design eliminates the separate tip and stem, reducing parts and making maintenance easier. It also features adjustable airflow for customization. Q: Can I use a standard DynaVap cap instead of the BallR Cap?A: Yes, but using a standard cap may lead to additional heat transfer up the stem. The BallR Cap is optimized for convection vaping. Q: Is the UniDyn compatible with water pipes?A: Yes! The mouthpiece fits 10mm glass adapters for easy water filtration. Q: How much herb can the UniDyn hold?A: The Adjust-a-Bowl feature lets you switch between 0.1g and 0.05g for full sessions or microdosing. Q: What makes the DuraDyn finish special?A: Unlike traditional coatings, DuraDyn is infused into the titanium, making it more durable, scratch-resistant, and comfortable in your hand. Why the UniDyn is one of the Best DynaVaps Yet Better flavour with convection heating. Fewer parts for easier maintenance. Lightweight, durable titanium with DuraDyn finish. More customization with airflow settings and bowl size. BallR Cap included for enhanced heat retention and flavour. The UniDyn is the most refined and efficient DynaVap yet, bringing top-tier convection performance to a lightweight, ultra-durable design. If you want better flavour, smoother vapour, and effortless maintenance, the UniDyn is the ultimate upgrade.

Read more less

Introducing the Vapman Click – The Future of Flame-Powered Vaping The Vapman has always been a standout in the world of flame-powered vaporizers, known for its rapid heat-up time, exceptional flavour, and satisfying performance. Now, with the release of the Vapman Click, this iconic device has taken a revolutionary leap forward. Click-Back Mechanism for Perfect Precision Say goodbye to guesswork. The innovative Clickback mechanism transforms the Vapman experience by providing audible feedback for your heating cycle. Heat the device until it clicks, inhale, and then stop when it clicks back into its original position. This groundbreaking feature ensures every session is consistent, simple, and satisfying—no counting or wondering required. Double the Capacity for Bigger Hits The Vapman Click is designed with a significantly larger herb chamber of 0.2g, making it perfect for longer sessions. Whether you're seeking full-bodied clouds or smooth, flavour-packed draws, the increased capacity and enhanced performance cater to all preferences. Fully Adjustable Airflow Control Customise your experience with precision. The Vapman Click’s adjustable airflow allows you to fine-tune your sessions. From thick, dense vapour with a closed airflow to fresh, airy hits with it wide open, the choice is yours. Masterful Craftsmanship and Premium Materials Handcrafted from a variety of exceptional wood options, the Vapman Click combines natural beauty with exceptional durability. Its three-part construction—featuring a mouthpiece, middle piece for adjustable airflow, and a heart piece housing the gold-plated copper oven—ensures efficient heat transfer and an unforgettable flavour experience. Effortless Performance for Everyone Analogue devices can seem daunting, but the Vapman Click’s new features make it user-friendly and approachable. The Clickback mechanism eliminates the learning curve, giving both beginners and seasoned users a consistent and enjoyable session every time. Portable Perfection Weighing just 25g and standing only 2.5” tall, the Vapman Click is as portable as it is powerful. Its compact size and protective case make it the ideal companion for vaping on the go. Experience the Evolution The Vapman Click delivers smooth, flavourful vapour with every use. Built for seamless performance, enhanced convenience, and lasting durability, it’s the next generation of flame-powered vaporizers. Take your sessions to the next level with the Vapman Click—designed to maximize taste, ease, and enjoyment, wherever you go. Meet the Vapman Click—the portable vaporizer designed for precision and ease, delivering consistent, flavourful vapour with no guesswork. Read our blog for an in-depth review and user guide to see why it’s a must-have for effortless vaporization.

Read more less

Healthy Rips Rogue 2 Vaporizer: High Performance, Great Value The Rogue 2 offers a perfect combination of power, convenience, and affordability for both beginner and advanced users. Built for those seeking top-tier vapour quality, extended battery life, and an excellent form factor, the Rogue 2 stands as one of the best-value vaporizers on the market. More Power, Titanium Chamber, and Limited Edition Black Chrome Designed on the proven platform of Healthy Rips’ popular devices, the Rogue 2 integrates major upgrades for an even better experience. It features a 30% larger heating element, a titanium chamber for cleaner sessions, and a sleek limited-edition black chrome finish that combines durability with style. The larger 12mm chamber and 3000mAh battery mean longer sessions and fewer reloads, with rapid USB-C charging to get you back in action fast. Advanced Convection Heating Technology - Massive Vapour Output The Rogue 2's convection technology combines hot air convection with mild conduction heating, delivering powerful vapour from the first draw. This technology provides consistent, even extraction without needing to stir, making every session smooth and efficient. Whether you prefer short sips or deep draws, the Rogue 2 is engineered to handle it. Premium Build and Safety Features The Rogue 2 is crafted with an alloy unibody, an isolated glass air path, and food-grade stainless steel to ensure both safety and performance. The titanium chamber and stainless steel heating coil ensure lasting quality while maintaining safety standards (RoHS and CE certified). Key Features of the Rogue 2 - 30% Larger Heating Element for increased power - Titanium Chamber for pure flavour and durability - Advanced Convection Heating for consistent vapour - Low Draw Resistance and Haptic Feedback - OLED Digital Flip Screen and Precision Temperature Control (280°-430°F) - Fast USB-C Charging: Recharges in ~90 minutes for up to 100 minutes of use and use while charging What’s Included - Rogue 2 Device - Protective Travel Cover - Glass Cooling Stem and XL Glass Cooling Stem - Dosing Capsule - USB-C Charging Cord - Cleaning Tools and Accessories - 1 Year Warranty For anyone looking to upgrade to a capable, all-in-one vaporizer at an excellent price, the Rogue 2 is an outstanding choice. Discover the Healthy Rips Rogue—an ultra-powerful, pocket-sized vaporizer designed for unmatched performance and portability. Visit our blog for a detailed review and user guide to see why it’s the ultimate choice for on-the-go vaporization.

Read more less

The Bowle 2 From Tafee – Here’s to Feeling Good all the Time Oh, Canada! We’re always proud to show off amazing new products from the wonderful folks north of the 49th parallel, and this offering from Tafee is crazy innovative while bringing it from every angle on this peculiar little device. Picture if you will, you’ve just entered a bar and you’re trying to convince a mark sitting at the bar that you’re not just some hipster dufus, you’re as cool as they come. You pull out your Tafee Bowle 2, give the gentleman a nod as you load it up, put a glass on top and hit the Bowle 2 from both ends: as a top-of-the-line vaporizer and as the wildest drink receptacle you’ve ever seen. Giddy up, indeed. Thoughtfully Engineered Design that Executes Exceptionally Made and assembled in Canada, a surprise these days, the Tafee Bowle 2 is a curious little fellow, but a perfect option for someone searching for eccentricities while still having a consistent, fast heating device with a surprisingly long battery life. This unique device heats up very quickly and has some unexpected customization options that have the Bowle 2 standing tall in the market, whether you’re looking for a talking piece, a double consumption device or just an exciting vaporizer that performs reliably and has a massive amount of power to boot. The Bowle 2 is a multi-use device, combining a tech heavy vaporizer with a modular drinkware attachment for your drinking convenience. Tafee is truly trying to blur the lines between the physical act of vaping vs drinking, and as Canada has had legal cannabis since 2018, it’s about time we start seeing more mingling between our beer bros and our vaping victors and the entire ethos behind this device shows a dedication to bringing those spheres closer together. Is that a Drinking Glass on a Vaporizer? So, let’s talk about cup shaped elephant in the room; the clear piece you’ll see sitting on top of the “puck” of the Bowle 2 can help with personal hydration or even vapour cooling, it’s there primarily as an optional addition so that your beverage of choice will always be at hand. You don’t have to use the cup, it comes off easily, but it is definitely something we’ve never seen before. Too many times we misplace our cocktails while vaping, and this is an intriguing solution for that. The versatility you’ll find in the Bowle 2 is pleasantly surprising. The Bowle 2 couldn’t be easier to use; just place your flower in the included ceramic pot, insert said pot into the stem slot, start the device and inhale once it’s reached temperature. The LED will turn a steady green colour when it's ready, then go ahead and test your lungs. The Bowle 2 uses a pure convection heating system that ensures the material is evenly heated, and you’ll find it offers a consistent experience from bowl to bowl and that is essential for a fulfilling vaping experience. The Bowle 2 outperforms devices of similar size in regards to vapour output, and how that is actualized shows the amount of attention that was paid to the little things during the design and production phase. How impressive is it? The Bowle 2 reaches its top temperature of 482°F in one second. No, that’s not a typo. The device has a temperature range, so if you’re aiming for larger bowls, you’re welcome to use the higher temperatures. This device is recognized for its battery life as well, proudly boasting upwards of 20+ sessions on a single charge. Designed for Aesthetic, Portability and Power, Nailing all Three The creators at Tafee are truly proud of the design of this device, and they should be, it is a multiple time award winner. These accolades attest to the painstaking attention to detail that the team put in. While the mildly controversial cup is not for everyone, you’re not forced to use it, and you’re still presented with an absolutely top-notch vaporizer that outperforms many at its price point while delivering top tier flavour. Add to that how easy the device is to use and customize to your preferred temperature and the possibilities of additional, modular glass pieces in the future and you end up with a device that performs better than you expect while being a fantastic talking piece simultaneously. A high-quality vaporizer with a distinctive twist, the Bowle 2 from Tafee is truly a dream device for so many of us. The device’s powerful engine, fast heat up times and long-lasting battery is exactly what you’re asking for from a portable. The cup is cool, we love the cup, but even if we lost it, we’d still turn to this device again and again. Peak performance and a sexy aesthetic make the Bowle 2 one of our favourite vaporizers. Bowle™ Series II Complete Set includes: Puck Base Unit and Small Stem Drinkware (300 ml / 10 oz) Potter+ Herb Shredder  Oven Pots (4)  Mouthpieces (2) USB-C Charging Cable  Maintenance Kit Quick Start Manual

Read more less

DynaVap HyperDyn: The Ultimate "Big Bowl" Vaporizer A New Experience with State-of-the-Art Design The HyperDyn is DynaVap’s first “Big Bowl” vaporizer, offering a completely new experience with its state-of-the-art tip and cap combination. Featuring a larger chamber volume (average of 0.25g), the HyperDyn is constructed with medical-grade titanium, colored and protected by DynaVap’s advanced DuraDyn coating technology. This innovative device boasts a 10mm and 14mm taper, accommodating water piece use, and remains modular with previous DynaVap midsections, tips, and mouthpieces. Who is the HyperDyn For? Connoisseurs looking for a larger “session style” DynaVap vaping experience, and those yearning for a DynaVap with a bigger bowl. Benefits Massive Rips & Heavy Hits Push thermal extractions to the limit with the HyperDyn's larger chamber. Durability Crafted from high-quality, medical-grade titanium and built to last a lifetime. Fully machined and crafted in Wisconsin, USA. Everything is titanium except for the o-rings and thermostat. Flavour Explosion Experience terpenes like never before with enhanced flavour from your dry herb and/or concentrate. Prolong Your Session Enjoy longer sessions with the larger capacity chamber, reducing the frequency of reloads. Eliminate Combustion Enter a smoke-free world of enjoyment with the HyperDyn, leaving combustion behind for good. Discreet, Portable, & Modular Designed to fit in your pocket and be enjoyed during any activity. Modular with previous DynaVap components. Battery-Free No need for batteries. Just use a torch lighter or induction heater, and you’re ready to go. HyperDyn Features - Massive Rips: Enjoy bigger hits with the larger tip chamber/bowl volume, approximately 2.5x the original chamber size. - Extended Sessions: Prolong your vaping session with a larger capacity bowl that extends time between reloads. - Scratch Resistant: Clean, scratch-resistant look from DynaVap’s DuraDyn coating technology. - Durable Build: Hardened titanium guarantees a long-lasting device. - Optimal Bong Fitment: Built-in 10mm and 14mm tapers for use with water pieces. - Modular Compatibility: Compatible with all previous DynaVap midsections, tips, and mouthpieces. (Note: The Hyper Cap only fits the Hyper Tip.) - Ergonomic Design: Ergonomically designed stem enables easy Airport usage. - Precision Machined Cap: Titanium Cap that connects to the Hyper Tip without threads, consistent look and function with DynaVap’s Captive Cap technology. - Adjustable Airflow: Airflow is adjustable via the connection between the Hyper Tip and Hyper Cap. Tailor your draw to your preference. - Seven Unique Airflow Settings: Adjustable Airflow Control from seven settings controlled by the condenser depth within the mouthpiece. - Optimal Temperature Control: Hyper Cap engineered to “click” when heated to the optimal vaporization temperature, ensuring an exceptional session. How to Use 1. Remove the Cap 2. Load Your Dry Herb into the Tip chamber/bowl. 3. Place the Cap Back on the Tip 4. Heat the Cap with a Torch or Induction Heater until it Clicks. 5. Inhale from the mouthpiece end. 6. The Cap will click again when it has cooled down. HyperDyn Parts - DynaVap’s Hyper Cap - Titanium Tip: Hyper - Titanium CCD (Screen) - High Temp O-Rings (2) - Titanium Condenser Assembly with Mouthpiece: Hyper - High Temp O-Rings (2) - Titanium Stem: HyperDyn - Hyper Dosing Capsule Experience the new standard in vaporization with the DynaVap HyperDyn.

Read more less

The Easiest Way to Get Started with DynaVap The DynaVap "M" stands out as the top-selling battery-free dry herb vaporizer of their lineup, offering unparalleled versatility and convenience. Crafted from durable stainless steel and devoid of electronic components, this portable device provides the freedom to vape anywhere, anytime. From microdosing to complete extraction in one heating cycle, the "M" caters to a variety of experiences, utilizing virtually any heat source for optimal flavour, with butane torches or induction heaters are recommended for the best taste. No Combustion, No Smoke, Only Vapour Designed for anyone seeking an exceptional dry herb vaping experience without breaking the bank, the M7 delivers a host of benefits. Crafted from medical-grade stainless steel in the USA, it offers unmatched durability. Experience a flavour explosion like never before, as the DynaVap vaporizers eliminate combustion, providing a smoke-free world of enjoyment through thermal extraction. Compact, discreet, and modular, these vaporizers fit into your lifestyle, allowing you to enjoy your favourite activities while packing a minimal vaping kit. A Full Kit with Backup Components The M7 features numerous enhancements for an improved vaping experience when compared to its predecessor. Enjoy bigger rips with increased heat retention in the tip chamber, while the Finless Tip design keeps your fingers and the stem much cooler. Refined mass distribution prevents scorching and hot spots, while redesigned airflow ensures even extraction. The microdose-ready "adjust-a-bowl" reduces chamber size, while the streamlined design offers a pleasant look and feel. With the DynaVap M7 Starter Pack, you'll receive everything you need to get started, including DynaStash, Single Torch Lighter, DynaWax, as well as extra consumable components to ensure you’ll always have a backup on hand.

Read more less

Minimalist Design, Maximum Performance Discover the perfect fusion of minimalist design and exceptional performance with the Camouflet Injector. Lightweight and versatile, this injector heater is designed for use with 20mm coils powered by PID temperature controllers, or with the Camouflet Inductor induction heater (you can even use it with a big ol' torch as well). Signature Technology, Unique Power Utilizing the same cutting-edge technology developed for the Convector but applied in a larger format, the Camouflet Injector delivers a unique and powerful signature that's sure to tantalize your senses and delight your taste buds. The Injector is plenty powerful after a proper heating, don't let the small size fool you. Camouflet Injector Features: - Stainless Steel Housing: Built to last, the Camouflet Injector features a durable stainless steel housing for longevity and durability. - Patent-Pending Heater Matrix: Experience enhanced performance with the patent-pending heater matrix, ensuring rapid and consistent heating for optimal vaping sessions. - 18mm Male Attachment: Compatible with 20mm e-nail coils with 4 or 5 coil wraps, the Camouflet Injector offers versatility and convenience. - Compatible with the Inductor: Pair the Camouflet Injector with the Inductor for seamless integration, enhanced performance, and a little magic in your next session. - 3mm Threading for Handle Connection: Connect with ease using the included handle or use a custom handle, offering flexibility and customization in usage. - Tethered or Untethered Use: Enjoy the freedom to use the Camouflet Injector tethered or untethered, providing versatility to suit your preferences. A wireless/untethered Injector is the height of convenience and must be experienced for yourself to fully appreciate just how sweet it is. What's Included: - 1x Injector - 1x Handle - 1x Retention Ring

Read more less

Sleek and Minimalist Design The Convector comes in either stainless steel or titanium, and boasts a compact and minimalist design, offering a convection-focused heater that's user-friendly for novices and seasoned enthusiasts alike. Despite its size, this device packs a punch beyond its weight class, ensuring a satisfying vaping experience every time. Customizable Air Path Tailor your vaping experience with ease by choosing between the single-bore, high-flow ceramic air path tube or our quad-bore cooling tube. The single-bore tube provides lower draw resistance and exceptional flavour, while the quad-bore option increases cooling and slows draw speed. All of our Convector models are the quad-bore option, though a single-bore air path can be purchased separately. Ultra-Fast Heating and Cooling Equipped with a brand new, low thermal mass patent-pending heater design, the Convector delivers ultra-fast heat-up and cool-down times, allowing you to enjoy your vaping sessions where you want, when you want. You'll only heat the device for literally seconds, it heats up even faster than you expect it will. Advanced Features - Camo Cap: Featuring a precision heater plate assembly, the Camo Cap ensures optimal performance. Laser-welded heater plates with precise placement enhance heating consistency and prevent dislodging.   - Stem: Enjoy an 8mm precision bore throughout the stem, allowing for easy assembly with your preferred chamber or mouthpiece (DynaVap stems also use an 8mm connection). An improved taper ensures a better fit into 10mm glass joints, allowing you to use it with a 10mm female water piece without needing an adapter. - Chamber: The ceramic tube can be inserted into the chamber's back/male connection side, simplifying assembly with a single O-ring. An extended chamber connection ensures a secure fit to the stem. How to Use Using the Convector is straightforward and doesn't have a huge learning curve. Simply place your ground material into the chamber, ensuring not to overpack it for proper airflow. Attach the Camo Cap, heat the tip for your desired length of time with either a torch or an induction heater, and inhale from the stem opening. For even better performance, pair the Convector with the Inductor heat source. What's Included - 1x Titanium Convector Device - 1x Titanium Camo Cap - 1x Titanium Chamber with O-rings - 1x Stainless Steel Chamber Screen (Friction fit and replaceable) - 1x Titanium or Stainless Stem - 1x Bamboo Carrying Tube

Read more less